SUZUKI SAMURAI / SJ 410 - SJ 413 (1981 - 1998)

The MG Off Road rear bumper for the Suzuki Samurai comes from a simple principle: the rear end is the first part of the vehicle to take a hit off-road, and it should be built accordingly.

The structure is made from 4 mm S235JR steel, sized to absorb heavy impacts and to protect the rear end during tight manoeuvres, on ledges and in the technical sections where the back of the vehicle works against the terrain.

Sacrificial mounting brackets

A heavy bumper mounted too rigidly transfers the full energy of an impact straight into the chassis. On a 4x4, that is the most expensive mistake you can make.

The brackets on this bumper are designed to work as a sacrificial element: in a heavy impact they are the part that yields and deforms, absorbing the energy and preserving the integrity of the chassis. A bracket is replaced in a few hours. A bent chassis is not.

Plate and lights

The integrated licence plate mount is formed directly into the structure, keeping the plate protected and aligned with the bumper profile. The geometry is designed to accept the factory tail lights, with no adapting, repositioning or wiring modifications.

Versions for +25 mm and +50 mm body lift

The bumper bolts to the chassis, and a body lift does not move the chassis: once the body is raised, the bumper stays at its original height and alignment with the rear panel, the tail lights and the plate is lost.

That is why the bumper is available in three bracket configurations: stock ride height, +25 mm body lift and +50 mm body lift. Each version is dimensioned to bring the bumper back to the correct height relative to the raised body, keeping the alignment clean and the tail lights correctly positioned — no improvised spacers, no workshop adaptations.

Installation

Installation uses the included brackets and hardware and requires no welding or bodywork: the fit is direct and fully reversible.

Designed and built entirely in Italy, in our workshop in the Apennines, to stay with your Samurai through years of hard use.

Key features

• 4 mm S235JR steel construction
• Sacrificial mounting brackets that protect the chassis
• Available for stock height, +25 mm and +50 mm body lift
• Licence plate mount integrated into the structure
• Designed for the factory tail lights, no modifications
• Mounting brackets and hardware included
• No welding, no bodywork modifications
• Direct, fully reversible installation
• Exclusive MG Off Road design
• Designed and manufactured entirely in Italy

Fitment

• Suzuki SJ 410
• Suzuki SJ 413
• Suzuki Samurai (1981–1998)
• Suzuki Santana (up to 2004)
• Soft top, hard top and Long / Wagon versions

What's included

• 4 mm steel rear bumper
• Mounting brackets
• Complete hardware set
• Ready-to-install kit

Join the expedition, join MG Off Road.

Shipping: Every bumper is handcrafted in our workshop. Orders ship within 1–3 weeks. For specific requirements or urgent orders, get in touch.